How To Set Time On Armitron Digital Watch Wr330ft

You lot don't need to exist a master watchmaker to set or modify the time on an Armitron watch.

Image Credit: blyjak/iStock/Getty Images

In This Article

• Ready the Time
• Change the Time
• Add a Fourth dimension Zone

The Armitron Pro Sport Watch is an awesome device for tracking your workouts, charting divide times and hitting your goals. But the time doesn't set up on its ain. When you first get your watch, you'll need to fix the time yourself. And when daylight saving time ends or you travel to dissimilar time zones, you'll need to know how to modify the time on an Armitron watch.

Here's everything you need to know near Armitron watch set times and how to easily change them.

​Buy it:​ Armitron.com (men, women); ​Toll:​ starting at $25

How to Fix the Fourth dimension on an Armitron Pro Sport Watch

Follow the steps below, from the Armitron Pro Sport Watch manual, to set the time:

To set the fourth dimension on your Armitron Pro Sport Picket, yous'll need to know which push does what.

1. Identify Sentinel Buttons

There are four buttons on your sentinel.

1. The top left button (A) is "Reset"
2. The top right button (D) is "ST/STP," which stands for "Get-go" and "Stop."
3. The bottom left push (B) is "Mode."
4. The lesser right button (C) activates the light.

2. Hold the Reset Push

To begin setting the time, agree the "Reset" button (A) until you lot hear a beep.

3 out of the four screens on the watch volition starting time to blink. That means you're gear up to prepare the time.

3. Press the Way Button

Press the bottom left button (B), "Mode" to access the hour setup.

Note that pressing this button will not actually change the hour, only the 60 minutes side of the time display will start to blink. This indicates that you're set up to go along to the adjacent step to set the hour.

4. Utilise ST/STP to Adapt the Hour

Printing the "ST/STP" push button (D) to change the hour.

Each time you lot press the push button, the hour volition increase until it hits 12, after which it will restart at 1.

Press the "Style" push (B) again to set up the hour. When you practise, the hour side will stop blinking and the minutes will exist gear up for setting.

5. Use ST/STP to Adjust the Minutes

Press the "ST/STP" button (D) on the tiptop correct to increment minutes.

Each time you printing the push button, the number of minutes increases past i.

Once your spotter is fix to the right time, printing the "Reset" button on the tiptop left (A) to set up the minutes.

Desire a 24-Hour Time Display?

You can ready the time on an Armitron Pro Sport to a 12-hour clock or 24-hour clock, called military time in the United states of america. The spotter sets to 12-hour-fourth dimension be default.

To switch to a 24-60 minutes time display:

1. Hold the "Reset" button (A) until y'all hear a beep.
2. Printing the "ST/STP" button (D). The "AM" or "PM" icon to the left of the time will go abroad.
3. Press the "Reset" push (A).

How to Modify the Time on an Armitron Scout

Whether daylight saving fourth dimension but ended or you're moving to a different time zone, it'due south very possible yous'll need to change the time on your watch.

Doing so follows the same steps y'all used to fix the time in the showtime place. If information technology has been a while, just refer to steps one through five of the Armitron spotter instructions to a higher place.

How to Add Multiple Time Zones

If you demand to know the times in multiple time zones, you can set the time for another different time zone on your watch.

Follow the steps beneath to set an additional time:

1. To enter the Second Time Zone mode, press the "Mode" button 3 times.
2. Press the "Reset" button. The hours icon will offset flashing.
3. Press the "ST/STP" button to modify the hours.
4. When you've set the correct hour, printing the "Fashion" button over again. This will set the hours and allow y'all to change the minutes. The minutes icon volition begin flashing.
5. Press the "ST/STP" push once again to increase the minutes.
6. Once yous've selected the correct minutes, press the "Reset" button to set the fourth dimension.
7. Press the "Way" push to render to your principal time zone.

More Fettle Trackers and Watches

Source: https://www.livestrong.com/article/247211-instructions-to-set-the-time-on-an-armitron-pro-sports-watch/

Share this post